3010
Prism Firm-Set Adhesive
Bonds subfloor to GlueDown LVT for light-traffic conditions. Make sure to use the proper trowel based on porosity and primer usage.
Coverage: 150-260 sqft per gallon
Available Sizes: 1 Gallon, 4 Gallons
Flash Time
30-60 min
Working Time
12 hrs
Cure Time
12 hrs
Light Traffic
No Wait
Heavy Traffic
24 hrs
Rolling Loads
48 hrs
Ideal For The Following Flooring Products:
Foundations GlueDown Floor, Main Street, Studio 12 GlueDown Floor, Level Seven, InstaGrip
✔ Residential
✔ Multi-Family
✔ Light Commercial
Download Resources
Appropriate Tools
Square Notch Trowel 1/16" x 1/16" x 1/16"
U Notch Trowel 1/16" x 1/32" x 1/32"
75-100lb 3-Section Roller for Hard-Surface Floors
Required Testing
- Porous Substrate ASTM F3191:
Yes. Use correct trowel. - Non-Porous Substrate ASTM F3191:
Yes. Use correct trowel. - RH Tolerance ASTM F2170:
<= 99% - MVER ASTM F1869:
<= 12 lbs
Approved Substrates
- APA Underlayment Grade Plywood And OSB
- Association Grade Particleboard
- Cement Backer Board
- Cementitious And Anhydrite Screeds
- Concrete And Radiant Heated Subfloors That Do Not Exceed 85°F 30°C
- Existing Well Bonded Non Cushion Backed Vinyl Tile And Sheet Flooring
- Fully Secured Cork Underlayments
- Gypsum And Lightweight Concrete Primed
- Terrazzo Properly Prepared With All Waxes And Surface Finishes Removed